RV tub faucet lets you attach a handheld shower set (sold separately) so you can wash up after a long day at the campsite. Washerless 1/4-turn stems prevent leaks so you won't have to worry about wasted water.
Features:
Specs:
The D-spud outlet lets you attach a handheld shower set (sold separately) to make cleaning mud and sand off the kids, pets, and shower walls even easier. To divert the flow of water to the shower set, simply lift the diverter pin on the faucet up.
To install, use the inlet shanks to drop the new faucet and deck plate in place of your existing faucet. Hand-tighten the included hardware against the back of the wall, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Phoenix Faucets four inch dual handle RV tub shower diverter faucet. This unit's going to add or replace a tub shower diverter faucet in your RV. It's going to feature the dual acrylic lever handles. It gives the unit a really nice look. It's going to feature the quarter turn design, and they have the H and C on there to act as indicators for hot and cold water functions. The hand held shower is not included but it does have the D-Spud outlet on top for attaching the hand held shower.
Those showers are sold separately. That's basically just a hose and a shower head. They can be found right here at etrailer dot com. When you're ready to use the shower, all you have to do is lift up on the spout lift rod to divert water flow from the tub spout to the shower head. Back flow prevention is obtained by an installed air gap. The air gap is going to act as a back flow preventer, which is going to help prevent contamination of your fresh water supply.
The base of the unit is made from a durable plastic construction, and as you can see, it's going to feature a really good looking chrome finish. The mounting area is going to require two holes for your installation. These are going to be the connection points for the hot and cold water lines. They're separated on center by right around four inches. They're going to give us a length measurement at around an inch and a half. Measuring the base height, we're looking at about two and one eighth.
Measuring edge to edge, it's going to give us a measurement of about six and one quarter inches, and then from the back of the base to the furthest out point of the unit, we're looking at a measurement of around five inches. The connection points right here, these are going to have an outer diameter of thirteen sixteenths of an inch, with an inner diameter of a half inch. The shower hose connector, the D-Spud connector's going to have an outer diameter of thirteen sixteenths of an inch. Overall it's just a really nice design. Pretty simple installation. It does come with the mounting nuts as well as a vacuum plate, and it's going to come with your detailed installation instructions.
In the instructions, it's going to walk you through the installation process step by step. Again, it's going to require two holes for your installation. Those need to have a diameter of one inch, and then it does put in a specific note here in relation to that air gap that I was mentioning earlier for back flow prevention. It says that the outlet of the tub spout must be installed a minimum of two inches above the flood rim of the tub. It's going to walk you through how to get it installed, how to get everything connected. On this side, it's going to go over some operating instructions and just some helpful tips, and on the back side, it does have a detailed breakdown of the parts list. That's going to do it for today's look at the Phoenix Faucets four inch dual handle RV tub shower diverter faucet.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.